自动变速器打滑故障怎么处理？汽车起步时踩下加速踏板，发动机转速很快增高，但车速升高缓慢。更多汽修知识请关注微信公众平台：汽修工坊 汽车行驶中踩下加速踏板加速时，发动机转速升高但车速没有很快升提高;汽车平路行驶基本正常，但上坡无力，且发动机转速异常高。

　　What is the problem with automatic transmission slipping? When the car starts, pressing the accelerator pedal quickly increases the engine speed, but the speed increases slowly. For more knowledge about auto repair, please follow the WeChat public platform: Auto repair workshop. When stepping on the accelerator pedal to accelerate while driving, the engine speed increases but the speed does not increase quickly; The car runs normally on flat roads, but is unable to climb uphill and the engine speed is abnormally high.

　　故障排除：

　　Troubleshooting:

　　①、自动变速器油面太低;

　　① The automatic transmission oil level is too low;②、自动变速器油面太高，运转中被行星齿轮机构剧烈搅动后产生大量气泡③、离合器或制动器摩擦片、制动带磨损过甚或烧焦;④、油泵磨损过甚或主油路泄露，造成油路油压过⑤、单向超越离合器打滑;② 1. The oil level of the automatic transmission is too high, and it is vigorously stirred by the planetary gear mechanism during operation, resulting in a large number of bubbles. 3. The friction plates and brake bands of the clutch or brake are worn or even burnt. 4 Excessive wear of the oil pump or even leakage of the main oil circuit, resulting in excessive oil pressure in the oil circuit ⑤ and slipping of the one-way overrunning clutch;⑥、离合器或制动器活塞密封圈损坏，导致漏油。

　　⑥ The sealing ring of the clutch or brake piston is damaged, resulting in oil leakage.

　　本文由济南自动变速箱维修提供技术支持，更多的详细精彩内容请点击我们的网站http://www.jnbsx.com，我们将会全心全意为您提供满意的服务。

　　This article provides technical support for Jinan automatic transmission maintenance. For more detailed and exciting content, please click on our website http://www.jnbsx.com We will wholeheartedly provide you with satisfactory service.