产品中心 PRODUCT CENTER

济南成林·值得信赖Worthy of trust

全国咨询热线

0531-82820798

苗经理(13806401238)

电话:0531-82820798 

手机:13806401238

QQ:981562958

邮箱:981562958@qq.com

地址:济南市槐荫区张庄路8—3号


行业动态

当前位置: 首页>>新闻中心>>行业动态自动变速箱维修时的拆装注意事项

自动变速箱维修时的拆装注意事项

发布日期: 2020-06-20 来源: http://www.jnbsx.com/ 点击: 0

我们知道变速箱是汽车上的重要装置之一,所以对变速箱维修与选择是相当重要的。在济南的很多汽车维修公司中都有开设一些济南自动变速箱维修、济南变速箱维修的维修店。既然变速箱对于汽车是这么的重要的,那今天我们要和大家一起来了一下有关自动变速箱维修时的拆装注意事项。

We know that gearbox is one of the important devices in automobile, so it is very important for gearbox maintenance and selection. Many automobile maintenance companies in Jinan have set up a number of Jinan automatic gearbox maintenance, Jinan gearbox maintenance professional repair shop. Since the gearbox is so important to the car, today we have to work with you about the precautions for disassembling the automatic gearbox during maintenance.
在此小编要提醒大家提醒大家,对于变速箱的维修一定要找具有维修经验的公司维修!对于自动变速箱维修时的拆装注意事项,主要有以下五点:
In this small edition, we should remind you that you must find a company with professional maintenance experience for the maintenance of the gearbox. For the disassembly and assembly precautions during the maintenance of the automatic gearbox, there are the following five points:
1、先卸下万向节螺钉,使变速器和传动轴的万向节分离;再卸下离合器罩螺钉,使变速器和离合器分离;如果是远程操纵的变速器,则将操纵机构与变速器本体分离将变速器从汽车上拆卸下来。
1. First remove the universal joint screw to separate the transmission and the universal joint of the transmission shaft; then remove the clutch cover screw to separate the transmission and the clutch; if the transmission is remotely operated, separate the control mechanism from the transmission body and finally remove the transmission from the vehicle.
2、清洗变速器外部的油泥和污物,注意保护前后的轴头。
2. Clean the mud and dirt on the outside of the transmission, and protect the front and rear axle heads.
3、拧下放油螺塞,放净变速器中的润滑油,再琶油螺塞。
3. Screw down the oil drain plug, drain the lubricating oil in the transmission, and then plug the oil.
4、找一个干净无灰尘的场地,利用拆卸工具和铜棒,开始拆卸变速器。拆卸顺序一般是:变速器盖、轴、第二轴、中间轴、倒挡轴。
4. Find a clean and dust-free place, use the removal tools and copper bar, and start to remove the transmission. The removal sequence is generally: transmission cover, first shaft, second shaft, intermediate shaft and reverse gear shaft.
5、拆卸零件时,先看好零件原始的方向和位置后再拆卸,必要时,做好记录;拆下的零件按拆卸先后顺序,分部位排放整齐,必要时可用线或铁丝将各零件按顺序串在一起;齿轮可按原方向和位置套在轴上,以防装错或漏装。
5. When disassembling parts, first look at the original direction and position of the parts, and then disassemble them. If necessary, make records. The disassembled parts shall be arranged orderly according to the disassembly sequence, and the parts can be strung together by wire or iron wire if necessary. The gear can be sleeved on the shaft according to the original direction and position to prevent wrong or missing installation.
以上就是今天小编要和大家分享的相关知识,希望对大家有所帮助。如果大家还有相关疑问,欢迎来到官网咨询客服
The above is the relevant knowledge that Xiaobian wants to share with you today, hoping to help you. If you have any questions, welcome to the official website for customer service

关键词: 自动变速器故障检测一般程序 自动变速箱常见几种状况有哪些? 汽车变速箱进水后怎么维修? 汽车变速箱基础知识的特点讲解 自动变速箱维修保养要注意什么?

鲁公网安备 37010402000808号

  • 联系电话
    0531-82820798
  • 微信咨询